hamradiotools

Nexus 0.10.0

Memories section + a big rig-control & reliability batch. Released 17 July 2026. The current release is 1.24.0. Download it · Every version

Fixed

  • "Share my radio" (CAT broker) turns on without a restart.

    Enabling the broker — or changing its port — now takes effect immediately; you no longer have to restart Nexus. It also works while Nexus is sharing an external rigctld, so a logger (WSJT-X / N1MM) pointed at the broker connects right away.

  • A rig that rejects PTT no longer transmits into silence.

    On FT8/FT4 and phone, if the radio NAK'd or timed out the key command, Nexus played (or armed) modem audio while the rig stayed in receive — dead air on the band with no warning. It now surfaces "the rig didn't accept PTT — check your PTT method and CAT/port," so you know the key didn't take instead of calling into a void.

  • AI CW decoder now finds its model on Linux.

    The DeepCW model ships bundled inside the .deb and AppImage, but the app located it in a Windows-only way (next to the exe), so on Linux it reported "model not installed." It now uses the platform resource directory, so the model loads on all platforms — there's nothing extra to download or install.

  • "Sync from QRZ" now actually imports your QSOs.

    QRZ returns the fetched logbook as ADIF with its angle brackets HTML-escaped (<call:5>…), which Nexus was treating as literal — so the importer saw no records and reported 0 QSOs with no error, even after a full re-sync. Nexus now decodes the ADIF before importing, matching how established QRZ clients read the response.

  • The ALL.TXT decode log is now findable.

    It moved to an app-named folder in your local app data (%LOCALAPPDATA%\Nexus\ALL.TXT on Windows — the same class of place WSJT-X keeps its own), the folder is created if missing, and Settings ▸ shows the exact path with a "Reveal in folder" button. The hint now says what tripped people up: it's written only while the toggle is on, and the file first appears after the next decode. (It can't live in the install folder — Program Files isn't writable without elevation, so writes there would silently fail.)

  • WSJT-X UDP (GridTracker, JTAlert) and PSK Reporter now turn on without restarting Nexus.

    The UDP emitters were built once at startup, so enabling them after launch — the normal order when you set up GridTracker first, then point Nexus at it — did nothing until a restart. They're now rebuilt live when you flip the toggle or change the target address, re-announcing on connect so GridTracker registers Nexus immediately.

Changed

  • The Program section (radio programming) is now on by default.

    It works on open hearham.com repeater data with no setup, so it no longer waits behind an opt-in toggle. (If you'd previously customized your sections, enable it any time in Settings ▸ Features.)

Added

  • Separate PTT serial port, for SO2R and external keying interfaces.

    RTS/DTR PTT can now key on its own COM port, independent of CAT — so a controller like the microHAM u2R/MK2R (or a homebrew keyer) that routes PTT on, say, COM16 while CAT rides the radio's USB now works. Set it in Settings ▸ Rig Control when PTT method is Serial RTS/DTR; leave it blank to keep the old behavior (key on the CAT port). Selecting serial PTT no longer disables CAT — frequency and mode still track.

  • Type a COM port when it's not in the dropdown.

    The Serial Port and PTT Serial Port fields are now editable comboboxes: some driver setups (virtual/SO2R COM ports) make Windows enumeration come back empty, and you can now just type the port (e.g. COM16) instead of being stuck.

  • Skip Tx1 (FT8/FT4), like WSJT-X.

    A "Skip Tx1" checkbox in the Tx panel: when you answer a CQ, the QSO opens with your signal report (Tx2) instead of your grid (Tx1), saving a cycle. Standard callsigns only — a compound call (e.g. KD9TAW/P) still opens with the grid, since the report message can't carry it. Like WSJT-X, it's a per-session toggle and resets to off each launch.

  • A first-class Memories section — repeaters, HF nets, calling frequencies, POTA/SOTA and digital watering holes in one place.

    Replaces the small saved-frequency bank with a full manager: a sidebar of groups and ★ favorites, a clean list with an inline editor, and a CHIRP-style grid on demand. One-click Tune sets frequency, mode, repeater shift and tone in one atomic step and opens the right cockpit (CW → CW, SSB/FM → Phone, FT8 → Digital) — no wrong-mode flash. Star a memory and it rides the MEM strip in every cockpit for instant recall.

  • Starter packs.

    One click installs a curated channel set — VHF/UHF Calling & Simplex, HF Digital Watering Holes, POTA Activity, and Well-Known HF Nets — deduped, so re-installing is safe. Offered both in first-run setup ("Start with some channels?") and from the empty Memories view. Re-installing a pack also refreshes it: if a later Nexus release corrects a net's time or a note, installing again applies the correction. Any channel you've edited yourself becomes yours and is never overwritten — and turning a net reminder on won't stop that net receiving schedule corrections.

  • Quick-recall hotkeys.

    Press Ctrl+1 through Ctrl+9 from any section to tune your first nine ★ favorites — the same one-click tune (frequency, mode, shift, tone + cockpit switch) as the MEM strip, without reaching for the mouse. The strip's tooltips show each chip's hotkey.

  • Opt-in net reminders.

    Give an HF-net memory its meeting days and UTC time, tick Remind me, and Nexus raises a one-click Tune reminder a few minutes before it starts. Reminders are per-net — only the nets you enable, never a firehose.

  • Full CHIRP CSV round-trip.

    Import and export the standard CHIRP format, so channels flow Nexus ⇄ CHIRP ⇄ ~1,000 real radio models. The Program section still feeds repeaters straight into Memories.

Every version