hamradiotools

Nexus 0.11.0

RTTY + SSTV (beta), openings intelligence, and a decode-accuracy milestone. Released 18 July 2026. The current release is 1.24.0. Download it · Every version

Added

  • RTTY — a first-class modern RTTY mode (BETA: receive and transmit).

    A new RTTY entry in the Digital rail with a real cockpit: arm the decoder and decoded text streams live off your rig's audio with per-character confidence fading (weak copy renders faint — you can see how sure the decoder is), an AFC readout that locks to the signal, and a band selector preloaded with the classic RTTY watering holes (14.083, 7.080, 3.580…, license-filtered). Under the hood: a full ITA2 Baudot codec and a demodulator ported from fldigi's proven W7AY design (mark/space matched filters, optimal ATC, acquire-then-freeze AFC) — solid copy down to −2 dB SNR in testing. Transmit works on BOTH paths from day one: soundcard AFSK (rig in LSB, audio through the same TX route as FT8 so your drive/ALC setup carries over) and true FSK via a DTR/RTS keyline (rig in RTTY mode — narrow RTTY filters unlock), with a compose line, one-tap macros (CQ/Answer/Exchange/73), a hard Stop, and plain-language refusals when a send isn't safe (TX off, out of privileges, tuning). Beta note: the transmit path is new this release — verify your first over at low power.

  • SSTV — receive slow-scan images into a gallery (BETA).

    A new SSTV section: arm the receiver and images decode off the air (Martin, Scottie, Robot, PD — including PD120 for ISS events) with live progressive preview, auto slant correction, and every completed image saved to a browsable gallery folder stamped with mode, frequency, and UTC time. The band selector includes 145.800 FM — the ISS downlink — plus the HF calling frequencies (14.230 and friends).

  • Tempo: Call CQ is now a RUN.

    Toggle it on and Nexus keeps calling on every idle TX slot until someone answers — then it auto-pauses while you chat and resumes when the conversation goes quiet (or on your Resume click). The control lives in the Tempo header with its state always visible; no more one-shot CQ dead-end.

  • FT8/FT4: cross-cycle AP decoding (WSJT-X a7).

    Stations you decoded in the previous cycle are recovered a few dB deeper this cycle — their RR73s and reports especially. Matches WSJT-X's a7 machinery exactly; resets on band change.

  • Spots: freeform search.

    A search box over the firehose — terms combine across callsign, entity, spotter, mode, band, and frequency ("w1 20m cw").

  • Field Day / Winter Field Day correctness:

    the WFD window is now the full 30 hours (was 24 — QSOs in the final 6 hours weren't counted), digital contacts export their REAL mode (an RTTY WFD log no longer exports as "FT8" — a mode WFD bans), and the ruleset now knows which modes WFD prohibits.

Fixed

  • RTTY and SSTV no longer show the FT8 frequency bar and tier tiles

    — each cockpit's own band selector is the only dial control there, like Phone and CW.

  • The CW/Phone bandscope no longer paints a quiet band as full-width rainbow.

    The scope's auto-contrast stretched the noise floor across the whole palette, so filtered-out stopband noise looked like signals. It now enforces a 10 dB minimum visual span (quiet water renders dark; real signals unchanged), adds the FT8 waterfall's Gain/Zero controls, and shows a "Δ dB" readout of the view's true dynamic range.

  • Linux: caught driver panics are no longer silent, and shipped binaries strip debug info.

    A quirky serial/audio stack could panic on every device poll — invisibly costing CPU (sluggishness) and memory (the panic machinery's ~68 MB symbol cache). Caught panics now log with a count, and release builds carry no DWARF for that cache to parse.

  • 2m openings are now detected — and every opening is classified, tiered, mapped, and logged.

    The detector needed several distinct stations to call a VHF band open (right for a 6m Es cloud, impossible for 2m tropo/aurora, which are often ONE distant station): now a single genuine-DX station beyond 700 km — past the everyday troposcatter ceiling, at the floor of the real opening modes — opens a VHF band. Two more graduated triggers round it out: two distinct stations at 500 km+ catch the quick short tropo lifts (one alone is routine scatter and stays quiet — corroboration keeps false positives out), and two independent receivers near you each copying a 700 km+ path open the band even when you're parked on another band and transmitting nothing — your neighbors' ears become your sentinel. On top of that:

    • Tiered opening alerts by propagation mode. Sporadic-E and F2 go loud (rare and brief — grab-it-now, with a beep); Aurora goes loud with operating guidance ("beam north — signals sound raspy, CW & SSB work best"); tropo raises an informative note (lifts last hours). Routine local/scatter activity never alerts.
    • Opening sectors on the map. Both the 2-D map and the 3-D globe now draw each live opening as a wedge from your QTH toward the opening — amber for tropo, green for Es, violet for aurora, cyan for F2 — sized to the longest path heard, so you can see where and what kind at a glance. The live Openings pane's mode chips use the same colors.
    • A persistent openings log. Every opening episode is journaled when it ends (band, mode, start/duration, peak strength, longest DX, station count, direction) and survives restarts — an opening in progress when you quit is saved too. A new Openings Log pane in Connect reviews the history with 6m/2m filters: "how many real 2m openings this month, and did I catch them?"

Changed

  • RX audio level meter now reads in dB, like WSJT-X.

    It was a linear 0–1 bar whose "good" zone (0.45–0.9) was a voice-style target too hot for FT8, so a perfectly good weak-signal input read as "low" and pushed you to over-crank RX Gain. The meter now shows 20·log10(rms)+90.3 — the same scale as WSJT-X (aim ~30 dB; ~15–60 decodes fine; red is too hot) — so the reading is directly comparable and you can see you don't need much gain. The RX Level / RX Gain hints were reworded to match.

Fixed

  • The interface fills to the bottom of the window at every zoom level.

    Below ~900 px of usable height the UI scales down, and the app shell was being laid out at full height and then scaled — leaving a dead band at the bottom of the screen. The shell height now compensates for the zoom, so it fills the viewport exactly (no change at 100%).

  • Core "always on" features (Operate, Logbook, Settings, …) show an "always on" badge instead of a disabled toggle

    that looked like a broken control next to the real, toggleable feature settings.

Every version