hamradiotools

Nexus 1.10.2

Released 3 September 2026. The current release is 1.24.0. Download it · Every version

Fixed

  • The TX meters read during Tune again.

    Since late August the SWR/ALC/power bars stood still while Tune was keyed — a deliberate change that kept a slow meter read from gapping the tune carrier on a slow radio, made on the assumption that nobody watches the meters during a tune-up. You do: it is how you see the antenna tuner take, and remotely it is the only way. The meters now run during Tune with the same protection built in differently — a read is issued only while the carrier has enough audio queued to cover it, and it gives up quickly rather than wait — so a slow radio costs you a reading, never a gap in the carrier. From the operator's field test of 1.10.1.

  • CAT is more honest, and recovers on its own where it can.

    Leaving Nexus running while the radio was switched off could leave rig control in a bad state: the CAT indicator might stay green over a radio that was off, and a band change made while it was off was recorded as "the radio refused that frequency" and never sent again. Both are fixed. A link that goes silent now trips the CAT indicator red within a few seconds; a radio that simply did not answer is reported as exactly that, never as a refusal, so no band gets blacklisted for the session; and every band or mode Nexus had given up on is forgiven the moment the link comes back. Green now means a real answer — a mode change whose read-back failed, or a radio Nexus could not open at all, can no longer paint the indicator green, and on the native CI-V path a cached dial is trusted for only a few seconds so a switched-off radio cannot look connected. And where the radio's USB port itself comes and goes, Nexus watches for it and reopens the port when it returns — even under a new COM number, following it by USB identity — retrying on a backoff rather than giving up after one try. Some radios (notably the Yaesu FTDX10 and its family, whose Hamlib backend shuts down entirely when the rig is off) may still need a restart to pick the radio back up; that case is still being run down. From the operator's field tests.

  • A working connector no longer reads "stored — not verified yet" after every restart.

    The connection health shown in Settings ▸ Logging & Connectors lived only in memory, so each launch reset every connector to "not verified" until that session's first push — and for HRDLog.net, World Radio League and Cloudlog, which record no per-contact upload state, that line was the only evidence the code worked. It is now kept beside your settings and survives a restart. A manual push from a Logbook row now counts as evidence too, so pressing HRDLog or WRL on one contact updates the row immediately with HRDLog's or WRL's actual answer. From an HRDLog field report (LZ2AOV).

  • "Is calling you" now tells you about every station that calls — and never about the one you just finished with.

    Two things were backwards. With Auto on, a station answering your CQ raised no alert at all (the sequencer had already engaged them by the time the alert looked), a second or third station calling during a QSO was silent, and the only toast you ever saw was the partner's "73" after the contact was over. The alert is now per station: every new station that calls you is announced once, whatever you are doing — answering your CQ, calling in while you work someone else — and a sign-off (RR73/73) is never a call. A station you called yourself (search-and-pounce) never "calls you"; its replies are the QSO. A station that keeps calling is one alert, not one per period, and becomes news again after ten quiet minutes. From the operator's own field test of 1.10.1, with GridTracker2's behaviour as the yardstick.

  • −B4 now hides the station you just worked.

    The hide-B4 (and hide-blocked, hide-confirmed, hidden-call) filters kept the selected station on screen so your current partner could never vanish mid-QSO — but the selection lingers after a contact ends, so a just-worked station stayed in Band Activity with its B4 badge until you clicked elsewhere. The exemption now follows the station the sequencer is actively working, and nobody after the QSO is done. From the operator's 1.10.1 field test.

Every version