Nexus 1.9.0
Released 25 August 2026. The current release is 1.24.0. Download it · Every version
Added
-
CAT rig control now works out of the box on Linux and macOS.
Nexus carries Hamlib — the
rigctldprogram it drives your radio through — inside every download, on every platform. Nothing to install, no Homebrew, no apt. Windows has worked this way since the beginning. Linux and macOS did not, and the AppImage was the worst of it: an AppImage is the download you choose because it installs nothing, and it was the one that could not talk to a radio until you worked out on your own that you needed a package calledlibhamlib-utilsthat nothing had ever mentioned. It shipped Hamlib's licence files and no Hamlib. macOS had the same hole behindbrew install hamlib. If you already installed Hamlib yourself, nothing changes and nothing conflicts — Nexus prefers its own copy, and falls back to yours if that ever fails to start. -
Nexus speaks Spanish and French.
Both are picked up automatically from your system language, or you can choose one in Settings. The whole application is translated — all 4,681 phrases, every screen, the same coverage German has. Anything a future release adds shows its English wording until it is translated, rather than a blank. Frequencies, callsigns, grid squares, signal reports, mode names and every other on-air term stay exactly as they are in all languages. That is deliberate: Spanish and French both write a decimal comma, and a dial reading 14,074 is an operating fault, not a cosmetic one.
Fixed
-
The SSTV waterfall comes back.
Change band while a picture was coming in and the band display stopped and stayed stopped — switching modes and back was the only way to get it returned, and landing on an SSTV frequency stopped it again. The screen shows the band until a picture starts arriving and then shows the picture in the same place. A decode that began and never finished was never cleaned up, so the app went on believing a picture was still coming and held the display for it — for the rest of the session. Changing band is the obvious way to cause that, but so is the sending station stopping mid-picture, or the band simply going long. A picture that has run well past the time its own mode takes is now given up on and the waterfall returns. Nothing is given up early: the allowance is per mode, so a Scottie DX gets its four and a half minutes.
-
Picking a RTTY frequency from the band plan now puts your signal where the plan says.
The listed frequencies were chosen as the frequency your signal comes out on — which is what the dial reads on true FSK, but not on AFSK, the default. On AFSK the tones sit about 2.3 kHz below the dial, so the signal landed low: on 20 m it was inside the FT4 cluster, on 17 m and 12 m inside FT8, and on 15 m inside JS8 — the exact overlaps the band plan was written to avoid. Both keying backends now land in the same place, and it is the place the plan describes. Your dial reading will look about 2.3 kHz higher than before on AFSK; the signal is what moved back where it belongs.
-
A zoomed waterfall stays where you put it.
Picking a numeric span made the display re-centre on your receive marker every time you clicked, so each click slid the view sideways by up to half a span with nothing to scroll it back. The zoom is a slice of the passband now: it holds still while your marker is in view, and only moves when you tune outside it — so it still cannot end up showing you the wrong part of the band. The default Std view was never affected.
-
Linux: Nexus stops asking the system keyring whether it could upload when it has nothing to upload.
The auto-upload worker checked your ClubLog credentials every two seconds whether or not a single contact was waiting, and on Linux each check is a round trip to the keyring daemon. That is the same thing that was restarting gnome-keyring in a loop before 1.8.0, at more than twice the rate, in a different place. Windows and macOS were never affected — the check there is a local call.
-
Recording a QSL card that arrived no longer depends on a filter — or on not having sent one.
The control shipped in 1.8.0 could not be reached: it only appeared while the "needs confirmation" chip was on, so it was invisible in the ordinary Logbook where you work through a stack of cards. Worse, marking a card sent removed the menu, so the card that came back months later could never be recorded — the whole point of the feature. It is on every row now, and you still cannot mark one sent twice.
-
Contacts sent to Log4OM (and anything else on the N1MM broadcast) carry both signal reports.
Sent and received RST were missing from every QSO — the sent one only travelled in a field loggers read as contest exchange data, and the received one was not sent at all. The same bug in the N3FJP broadcast was fixed a while back and this one was missed with it.
-
RTTY transmits on the frequency you tuned to.
Clicking the waterfall to net onto a station moved the decoder but not the transmitter, which stayed on the default tone pair — so you answered on a frequency nobody was listening on. Your dial does not move; only the audio offset, exactly like the FT8 transmit marker.
-
The Tempo roster works on Tempo Deep.
It only ever listed stations heard on Tempo Fast, so on Deep it was always empty — which reads like a quiet band rather than a fault.
-
The compact Band Activity in the Tempo rail shows everything again.
It hid the filter chips but still applied whichever one you last chose in Operate, so a "CQ" chip set elsewhere quietly filtered the list with nothing on screen to explain it.
-
A directed CQ (
CQ DX) stays put instead of lasting one contact.You can type your CQ message in the Tx6 box on the Operate screen —
CQ DX KR4FQG EM64, or POTA, NA, TEST, a zone number — and it is parsed and sent. What went wrong is that "clear DX call and grid after logging" was also wiping that box, so a directed CQ survived exactly one QSO and then went back to a bare CQ, with the Classic screen the only way to set it again. That option clears the DX call and grid, as its name says, and leaves your CQ message alone. Editing it back to a plain CQ is still one change away. -
DXpedition is no longer counted as something you need.
A DXPED chip sat in the row of need icons claiming there was something to gain from a station — including ones you had already worked on that band, where it meant nothing at all. It was always a label rather than a reason, and it is already shown as an activity marker, so it was being said twice. The Needed board's DXped filter is unchanged, as are the POTA and SOTA markers.
-
The "needs QSL" chip now reads LoTW
, which is what actually closes it for awards. A paper card closes it too — the tooltip still says so — but eQSL and QRZ never did, and the old wording left people wondering whether the eQSL they already had counted.
Every version
- 1.24.0 11 Nov 2026
- 1.23.0 5 Nov 2026
- 1.22.0 1 Nov 2026
- 1.21.0 26 Oct 2026
- 1.20.0 22 Oct 2026
- 1.19.0 16 Oct 2026
- 1.18.0 12 Oct 2026
- 1.17.0 7 Oct 2026
- 1.16.0 3 Oct 2026
- 1.15.0 26 Sept 2026
- 1.14.0 20 Sept 2026
- 1.13.0 16 Sept 2026
- 1.12.0 14 Sept 2026
- 1.11.1 8 Sept 2026
- 1.10.3 4 Sept 2026
- 1.10.2 3 Sept 2026
- 1.10.1 1 Sept 2026
- 1.10.0 31 Aug 2026
- 1.9.2 29 Aug 2026
- 1.9.1 26 Aug 2026
- 1.9.0 25 Aug 2026
- 1.8.1 23 Aug 2026
- 1.8.0 23 Aug 2026
- 1.7.6 21 Aug 2026
- 1.7.5 20 Aug 2026
- 1.7.0 18 Aug 2026
- 1.6.1 17 Aug 2026
- 1.6.0 16 Aug 2026
- 1.5.0 16 Aug 2026
- 1.4.0 15 Aug 2026
- 1.3.0 13 Aug 2026
- 1.2.0 10 Aug 2026
- 1.1.0 10 Aug 2026
- 1.0.5 8 Aug 2026
- 1.0.2 6 Aug 2026
- 1.0.1 5 Aug 2026
- 1.0.0 4 Aug 2026
- 0.28.2 3 Aug 2026
- 0.28.0 3 Aug 2026
- 0.27.0 2 Aug 2026
- 0.25.0 1 Aug 2026
- 0.24.0 31 Jul 2026
- 0.21.5 29 Jul 2026
- 0.21.0 29 Jul 2026
- 0.20.0 28 Jul 2026
- 0.19.7 27 Jul 2026
- 0.19.6 26 Jul 2026
- 0.19.4 26 Jul 2026
- 0.18.0 25 Jul 2026
- 0.17.22 25 Jul 2026
- 0.17.21 25 Jul 2026
- 0.17.20 25 Jul 2026
- 0.17.19 25 Jul 2026
- 0.17.18 25 Jul 2026
- 0.17.17 25 Jul 2026
- 0.17.16 25 Jul 2026
- 0.17.15 25 Jul 2026
- 0.17.14 25 Jul 2026
- 0.17.13 25 Jul 2026
- 0.17.12 25 Jul 2026
- 0.17.11 25 Jul 2026
- 0.17.6 25 Jul 2026
- 0.17.5 25 Jul 2026
- 0.17.4 25 Jul 2026
- 0.17.3 25 Jul 2026
- 0.17.2 24 Jul 2026
- 0.17.1 24 Jul 2026
- 0.16.4 24 Jul 2026
- 0.16.3 24 Jul 2026
- 0.16.2 24 Jul 2026
- 0.16.1 24 Jul 2026
- 0.16.0 24 Jul 2026
- 0.15.24 24 Jul 2026
- 0.15.23 24 Jul 2026
- 0.15.22 24 Jul 2026
- 0.15.21 24 Jul 2026
- 0.15.20 24 Jul 2026
- 0.15.18 24 Jul 2026
- 0.15.17 24 Jul 2026
- 0.15.16 23 Jul 2026
- 0.15.15 23 Jul 2026
- 0.15.14 23 Jul 2026
- 0.15.1 22 Jul 2026
- 0.15.0 21 Jul 2026
- 0.14.0 21 Jul 2026
- 0.13.0 19 Jul 2026
- 0.12.0 18 Jul 2026
- 0.11.1 18 Jul 2026
- 0.11.0 18 Jul 2026
- 0.10.0 17 Jul 2026
- 0.9.7 17 Jul 2026
- 0.9.6 16 Jul 2026
- 0.9.5 16 Jul 2026
- 0.9.4 16 Jul 2026
- 0.9.3 16 Jul 2026
- 0.9.2 15 Jul 2026
- 0.9.1 15 Jul 2026
- 0.9.0 15 Jul 2026
- 0.8.9 15 Jul 2026
- 0.8.8 14 Jul 2026
- 0.8.7 14 Jul 2026
- 0.8.6 14 Jul 2026
- 0.8.5 14 Jul 2026
- 0.8.4 13 Jul 2026
- 0.8.3 13 Jul 2026
- 0.8.2 13 Jul 2026
- 0.8.1 12 Jul 2026
- 0.8.0 12 Jul 2026
- 0.7.1 12 Jul 2026
- 0.7.0 12 Jul 2026
- 0.6.0 11 Jul 2026
- 0.5.2 11 Jul 2026
- 0.5.1 10 Jul 2026
- 0.5.0 10 Jul 2026
- 0.4.1
- 0.4.0
- 0.3.0
- 0.2.0 3 Jun 2026
- 0.1.0