hamradiotools

Nexus 0.4.0

band map, log stats, weak-signal CW, callbook photo, filter width. The current release is 1.24.0. Download it · Every version

Added

  • Vertical pop-out band map

    — an N1MM-style frequency map of live cluster spots for the Phone and CW cockpits, colored by award need with worked calls struck through; click a spot to QSY to its exact frequency and prefill the log (including from the pop-out window).

  • Full-band activity strip

    — a clickable spot strip spanning the whole band with a you-are-here dial marker; your licensed phone sub-band is shaded per US license class.

  • Logbook Statistics

    — QSOs by band / mode / year / hour-of-day, top DXCC entities, WAS states, confirmation rate, plus continent, CQ-zone, and DX-vs-domestic breakdowns (cty.dat-resolved).

  • Weak-signal CW decode

    — the decoder now gates on true SNR against off-pitch band noise, so the sensitivity slider genuinely trades copy against noise and the "E E E" storm between signals is gone.

  • Real CAT S-meter

    — the Phone scope meter reads the rig's actual STRENGTH over CAT (S0–S9+60); shows "—" rather than faking a level when the rig doesn't report it or during TX.

  • RX filter-width control

    — read/set the rig's passband over CAT from the Phone and CW cockpits (CW defaults narrow at 500 Hz to dig signals out of QRM).

  • Rig DSP toggles

    — NB / NR / auto-notch on Phone and CW, plus COMP and VOX on Phone; capability-probed so only functions your rig reports are shown.

  • Manual split + sideband override on Phone

    — one-click "work up N" split with an offset stepper, and a USB/LSB/FM override that reverts to the band-correct sideband on a band change.

  • Callbook photo + worked-before recall card

    — the "B4" hint grew into a full recall panel: QRZ/HamQTH profile photo, prior contacts, distance/bearing from your QTH, and a same-band dupe flag.

  • Split RST fields

    — separate Sent / Rcvd reports in the log entry (the CW decoder fills Rcvd).

  • Auto callbook lookup

    — name/QTH fill shortly after you stop typing a call, no Tab needed.

  • Update check

    — on launch (throttled to once a day) Nexus checks SourceForge for a newer release and shows a dismissible notice, with a manual check in Settings; it only opens the download page, never downloads or runs anything.

Changed

  • The redundant top-bar band dropdown (fed by the digital band plan, so a wrong-dial control on voice/CW) is hidden on…

    The redundant top-bar band dropdown (fed by the digital band plan, so a wrong-dial control on voice/CW) is hidden on Phone and CW; each cockpit keeps its own band picker.

Fixed

  • A periodic scope/passband stall: the slower CAT reads (mode, S-meter, DSP functions) are now staggered across poll cycles instead of stacking into one.
  • The 4 m band (70.0–70.5 MHz) is now recognized by the UI band ranges, matching the backend plan.

Every version