hamradiotools

Nexus 0.9.1

late-start TX, K4 CAT stability, wider FT8 passband. Released 15 July 2026. The current release is 1.24.0. Download it · Every version

Added

  • FT8/FT4 decode passband is now adjustable up to 4 kHz.

    Operators regularly call above the old 2.9 kHz ceiling on crowded bands. Settings ▸ Digital ▸ Decoder passband now lets you raise F high toward 4000 Hz, and the waterfall, the click-to-tune range, and the Rx/Tx offset entry all extend to match — so a station calling at 3.3 kHz is visible, decodable, and answerable. The default stays 200–2900 Hz, so nothing changes unless you widen it. What this means: you can now work the people who park themselves up high where it's less crowded. (This setting also existed before but never took effect — the saved value used a key the backend didn't read; that round-trip is fixed.)

Fixed

  • You can start a transmission a second or two into a period instead of waiting a full cycle.

    Previously, if you keyed up more than ~2 s late you'd be deferred to the next same-parity slot — the "clicked one second too late, now I wait 30 seconds" complaint. Nexus now keys the current period the WSJT-X way: the over stays time-aligned and just drops its leading samples, which the far-end decoder still syncs on. The budget is per mode and preserves the sync tones — up to ~6 s late for FT8, ~3 s for FT4.

  • CAT no longer drops and reconnects every few seconds with the Elecraft K4 (QK4 Remote).

    Nexus polls the rig for RF power, mic gain, NR level and AGC to mirror the knobs into the UI. The K4 over QK4 Remote is slow or silent on those reads, so each one hit the command timeout and tore down the CAT socket — the ~5 s hang. Those reads are now capability-cached the same way the S-meter and DSP toggles already were: after a few misses Nexus stops issuing the read, so a rig that doesn't answer it quickly keeps a stable connection. (WSJT-X, HRD and DXLab were unaffected because they don't poll those levels.)

Every version