hamradiotools

Nexus 0.5.0

operating experience + dual-radio. Released 10 July 2026. The current release is 1.24.0. Download it · Every version

Field-test-driven work on the day-to-day operating experience (waterfall fidelity, a prominent frequency readout, dial latency, logbook scale) plus the start of true dual-radio support.

Added

  • Dual-radio — run two rigs at once

    (e.g. an HF radio + a VHF/UHF radio on separate antennas). Add a second radio in Settings ▸ Rig; a switcher appears in the top bar. Both rigs stay permanently connected — the non-active radio is monitored live (its frequency/S-meter show in the switcher) and switching is an instant handoff with no CAT teardown, so the dial never bounces. Invisible for single-radio stations (only a quiet "+ Add radio" button appears). Each radio has its own CAT/audio/rotator config and band-coverage set; daemon ports are auto-assigned distinct and auto-repaired on load.

  • Prominent, unified frequency readout

    — a large, accent-colored MHz display shared across the digital, CW, and Phone cockpits; click to type an exact frequency.

  • Universal FFT waterfall

    — every rig's audio scope now uses a real 4096-point FFT (~7.8 Hz/bin across 0–4000 Hz) instead of the old coarse filter bank, so even a Yaesu's soundcard waterfall resolves close signals.

  • Mouse-wheel tuning

    — scroll over the scope or the big frequency readout to tune by the selected step (Shift = ×10); great for hunting CW/phone signals off the FTx default frequencies.

  • POTA park auto-load by reference

    — type a park number in the log entry and its name/location fills in from the local index, with a live api.pota.app fallback.

  • Optional ADIF import at first-run

    — the setup wizard now offers to import your existing log up front (skippable), so the needed/worked-before/awards intelligence works from day one.

  • Per-radio standard baud dropdown

    in the Rig settings (1200–115,200) instead of free text.

  • Tune & Stop-TX controls in the Phone and CW cockpits

    — a Tune button keys a steady carrier to tune an ATU or amplifier (auto-released by the TX watchdog), and Stop TX unkeys everything instantly (PTT, tune carrier, and CW keying). Restored — these were missing from the voice/CW cockpits.

Changed

  • Fast dial tracking

    — the rig's frequency is now polled on a short (~180 ms) sub-cadence, separate from the slower S-meter/mode/power reads, with transport-aware read deadlines, so the dial keeps up with the VFO knob (matching HRD-class responsiveness on Yaesu).

  • Mode changes keep the rig's filter width

    — switching bands/modes no longer forces the rig's passband to its default (which was popping the Width display); explicit width changes still apply.

  • Logbook performance at 10k+ QSOs

    — the logbook list is virtualized and its filter/sort memoized, so large logs scroll smoothly instead of lagging.

Fixed

  • FTx Call Roster overlap

    — need-chips (e.g. NewZone) no longer spill over the callsign, and the Call column fits longer calls like VE2OPR.

  • Settings-tab crash hardening

    — audio/serial device enumeration is now panic-isolated, so a quirky/virtual device (some Flex DAX / RDP-remote-audio setups) can't crash the app when opening Settings.

  • Dual-radio CAT no longer dies on the background radio.

    Saving a radio's config could leave the active radio and the monitored radio fighting over the same daemon port, so CAT went dead on whichever radio wasn't active — and flipped when you switched. The daemon port is now always re-synced after de-confliction, so CAT stays live on both radios in either direction.

  • Per-radio audio on rigs with a generic USB codec.

    Two rigs that both enumerate as "USB Audio CODEC" are now listed as distinct entries ("USB Audio CODEC", "USB Audio CODEC #2"), so each radio can point at its own soundcard; previously both silently resolved to the first codec.

  • Radio soundcards that use 8-bit or 24-bit audio

    (some Icom USB codecs) now open correctly for RX capture, TX, and the headphone monitor — they were failing with an "unsupported format" error. _(Protocol decoders for a native FlexRadio panadapter and a per-radio native scope are in progress behind the scenes; not yet user-visible.)_

Every version