hamradiotools

Nexus 1.5.0

Released 16 August 2026. The current release is 1.24.0. Download it · Every version

Added

  • Nexus runs on the Mac.

    A native Apple Silicon build (M-series, macOS 12+), signed and notarized, with the same self-updater as Windows and Linux. CAT control uses Hamlib from Homebrew (brew install hamlib); Intel Macs can build from source, which works out of the box as of 1.5.0. First macOS release — treat it as fresh ground and report what you find. (Added to the 1.5.0 release 2026-08-16, after the initial publish — same source, new platform.)

  • MSK144 has a display built for meteor scatter.

    Switch to MSK144 and the waterfall strip becomes a time display — the Fast Graph, as WSJT-X draws it: seconds across one T/R period, a green power trace where a ping is a spike you can see land, the current period above the previous one, and a marker with the callsign at each decode. On meteor scatter every signal sits at 1500 Hz and lives for milliseconds, so a frequency waterfall showed one unmoving stripe while the actual event was invisible. A 5/10/15/30 s T/R selector sits beside the mode pills — on meteor scatter the period is an operating decision, not configuration.

  • MSK144 pings appear while the period is still running.

    Nexus used to decode once at the period boundary, so you watched a silent screen for 15 seconds and then got history. Pings now reach the decode list about two seconds after they land, mid-period, with the T column showing when in the period each one arrived.

  • Worked-before comes in two strengths.

    The B4 chip is hollow when you have worked the callsign anywhere and solid when you have worked them on the band you are on now — the same two scopes WSJT-X colours separately. A new setting (Logging ▸ Worked-before (B4) & dupes ▸ Match mode too, off by default like WSJT-X's) makes 40m FT8 and 40m phone count as separate contacts for both the chips and the log strip's Dupe badge.

  • The Spots panel shows the state it already filtered by

    , as a sortable column, and the Phone/CW band-strip flags carry the state in their tooltips.

  • Program can take channels you type.

    Add by hand enters a repeater or simplex channel the directory has wrong or missing, and Import CHIRP CSV reads the same format Program exports and CHIRP itself saves. Memories has had both for a while; now the workbench that builds your radio's channel list does too.

  • The rig scope's waterfall gets the scroll-direction button

    , matching the FT8 waterfall, and defaults the same way (newest at the top). RTTY and SSTV share the FT8 waterfall and already had it.

Fixed

  • A dead sound card recovers instead of failing silently and permanently

    — contributed by on8st. A capture stream error used to be logged once and never acted on: the audio thread kept running against a card that would never deliver another sample, so the waterfall froze until a restart. A stream error now puts the card on probation, silence confirms the death, and the card is rebuilt — waiting for your key to come up first, so a recovery never cuts an over. A card that flaps is rebuilt at a steady rate rather than the flap rate, and a machine whose default device disappears entirely keeps retrying instead of giving up for the session. (#73, #74)

  • Adding a radio no longer switches the station onto it

    — contributed by on8st. Pressing "Add radio" silently moved the station onto the new, empty profile — tearing down the working rig's CAT to bring up one with no port and no model, which froze the interface and blanked the settings pane. A new roster entry is just a roster entry now; the form opens on it for editing, and "Make active" stays the deliberate act it always was. (#91)

  • Every serial port showed twice on macOS

    — contributed by on8st. The system publishes each USB-serial adapter as a tty/cu pair, and the rig picker listed both; the tty twin could hang a CAT probe waiting for a carrier-detect line no radio asserts. Only the cu entry is listed now. (#92)

  • A rigctld that cannot actually run no longer wins the CAT probe

    — contributed by on8st. A Hamlib built from source can be first on PATH yet die before main with an unloadable library; Nexus committed to it and CAT came up dead with no usable diagnosis. Every candidate is now spawn-checked first, and one that cannot run is skipped for one that can. (#70)

  • Nexus builds on a Mac without hand-set linker paths

    — contributed by on8st. The gfortran and FFTW3f runtimes live under Homebrew's prefix, which Apple's linker does not search; the build now asks the toolchain where its own libraries are. With the golden fixture made portable across architectures (#90), the test suite passes on Apple Silicon out of the box. (#69, #90)

  • Working the ISS voice repeater no longer transmits on the bird's downlink.

    Two faults, both found on the air. A same-band (V/V) pass asked a Main/Sub mapping to do something those radios cannot — Main and Sub can't both sit on 2 m — so nothing was written and TX stayed on the downlink; a V/V pass now rides the A/B split, which is how those passes are worked. And a rig keyed from the HAND MIC didn't count as transmitting, so half a second into an over the Doppler tick and the dial-keep would retune the transmit VFO back onto the downlink. A mic-keyed rig is now keyed everywhere.

  • "Call CQ" stops claiming you are calling CQ.

    The CQ/S&P toggle lit Call CQ through every S&P contact and forever after, because it read a flag a directed call also sets — and the AUTO-CQ pill made the same false claim. Both now read the real CQ-run state, and the idle Call CQ button drops its permanent red border: in this app red means TX-armed, which an idle station is not.

  • Your own transmission scrolls as a dark band on the waterfall

    — the honest "not listening" gap, as WSJT-X and your rig's own scope draw it. It used to paint a full-width red band after every over: while keyed the rig's muted receiver dragged the display's auto-contrast down to digital silence, and key-up clamped the whole band to the palette's hot end for a couple of seconds. The false rows are dropped at the source now and the contrast holds through the over.

  • CONFIRM is now NEEDS QSL, and says what it means.

    The tag marks an entity, zone or grid worked on this band but not yet confirmed — a fact about your award slot, never about the callsign in the row. The old "Worked —" wording read as a claim about the station and made NEEDS-QSL-without-B4 look like a bug; it is the normal case.

  • CW keyed over CAT sends the whole macro.

    Every one-character word — the closing K, a bare ? — was silently rejected by the keying library, which reads a single-character message on a Yaesu as a stored-memory number; a lone digit 1–5 would even have played the rig's stored message instead of keying the digit. Padded past the trap. (#86)

  • Ham Radio Deluxe forwarding actually forwards when it is the only connector enabled.

    An internal gate skipped the send loop unless some other upload service was also on, so an HRD-only station queued contacts forever and sent none — while the app said "Logged". (#87)

  • The update banner's "Not now" sticks.

    Dismissing an update lasted until the hourly re-check, which re-downloaded it and put the banner straight back. A dismissal now holds for that version; a newer release still lands.

  • Re-importing a log with PSK31 respelled as BPSK31 no longer doubles those contacts

    — the last spelling pair from the import-dedup work that shipped in 1.4.0. (#31)

  • The "check for updates" tooltip stops naming SourceForge

    — the check reads the project site first, and the Download button opens GitHub Releases.

  • Entering MSK144 parks both frequency offsets on 1500 Hz

    , where the mode actually transmits — the red TX marker could sit at 2400 Hz while the rig keyed 1500 — and the DT column reads as T (time of the ping within the period) instead of painting every healthy ping red with FT8's clock-skew colouring.

Changed

  • HF is grid-quiet by default.

    The rare-grid (💎) alerts now scope to VHF and up like the plain grid alerts — on HF nearly every decode is an unworked grid, so even the rare tier read as chatter. An HF grid-chaser widens it back in Settings ▸ Spots & Alerts.

  • The FT8 cockpit no longer hosts the memory favorites strip.

    Memories are repeaters, nets and calling frequencies — Phone and CW things, and those cockpits keep the strip. In the FT8 header a favorite chip was one click from retuning the rig off the band mid-sequence. The recall hotkeys work everywhere, unchanged.

Every version