hamradiotools

Nexus 0.16.0

APRS messaging (send, threaded, auto-ack) + decode coverage. Released 24 July 2026. The current release is 1.24.0. Download it · Every version

Rounds out the APRS feature after a completeness review, and cuts a minor release.

Added

  • Send APRS text messages.

    The APRS cockpit has a Message box: enter a callsign and up to 67 characters and send. Each message carries a rolling line number so the recipient can acknowledge it — same up-front TX gate as a beacon (TX must be enabled and the frequency in your privileges), so nothing keys unexpectedly.

  • Auto-acknowledge.

    An incoming message addressed to your callsign that asks for an ack is acknowledged automatically — but only when TX is enabled and allowed; with TX off, Nexus stays silent (RX-only), exactly as before.

  • More decode coverage.

    Compressed position reports (base-91), object reports (;), and third-party / I-gated traffic (}) now decode to the real originating station.

Changed

  • Messages are threaded, not collapsed.

    Received messages get their own chronological list instead of being folded into the sender's position row, so a multi-line exchange all shows (previously only the last message per station survived).

Fixed

  • APRS Tune now switches to your VHF radio and sets FM.

    On a dual-radio (HF + VHF) setup, tuning an APRS frequency hands off to the 2 m-capable radio and puts it in FM simplex — APRS isn't a Phone/Digital section, so it previously kept the prior mode (DATA/USB) and the packet never decoded. FM is band-guarded, so it never follows you onto another band.

  • The APRS window no longer shows the FT8/FT4 tier chrome

    (it's a packet mode with its own band picker) — same treatment as RTTY/SSTV.

  • Clearer CAT failures.

    When the rig stops answering, Nexus now says which rig, on which port and baud, isn't responding — and for an Icom points at the two-USB-port / CI-V-baud gotcha — instead of a silent reconnect loop. The rig-control diagnostic also captures rigctld's own error output and the launch config, so a "rig never answered" fault is finally diagnosable.

Every version