hamradiotools

Nexus 0.2.0

Released 3 June 2026. The current release is 1.24.0. Download it · Every version

This is a beta / pre-release: everything below is simulation- and Windows-cross-build-validated, not yet proven on the air. On-air decode-rate-vs-SNR remains the open gate.

Added

  • IR-HARQ is live end-to-end.

    The incremental-redundancy retransmission combiner — previously designed-but-dormant (simulation-only) — now runs through the full live pipeline and is on by default. A frame that fails to decode standalone (RV0) is buffered and joint-turbo-combined with its retransmissions: RV0 carries the base 174 bits; RV1/RV2 each carry 87 new punctured LDPC(348,91) parity + 87 repeated systematic, each with a distinct Costas sync (RV0 [0,2,3,1], RV1 [1,3,2,0], RV2 [3,0,2,1]). Slot expiry 30 s, freq tolerance +-10 Hz. A coherent CPM-Costas discriminator (ft1_rv_detect) identifies the RV (>99% accurate, <1% false to -11 dB), and the QSO sequencer drives RV escalation (0->1->2 on implicit NAK, reset on implicit ACK). Simulated (AWGN/fading sweeps): combiner +1.3 dB AWGN and +3.2 dB under 1 Hz / 1 ms fading (3-TX); through the full live pipeline ~+2.5 dB threshold shift and ~2x QSO completion in the -11..-13 dB zone. UI adds a HARQ.RVn decode badge, a HARQ on/off toggle (default on), and a session rescue counter; Decode.rv reports how many RVs were combined.

  • DX1 full-passband acquisition.

    DX1 RX now decodes every signal across 200-2900 Hz per slot (like FT1's Costas search) instead of a single carrier at the tuned RX offset; rx_offset_hz is demoted to a waterfall marker / TX-pairing hint. Three-stage scan: a coarse chirp-correlation carrier sweep (12.5 Hz grid, pre-folded replicas, trig-free hot loop) -> median-threshold peak-pick -> full CRC-14-gated decode per survivor. ~3-4 s/slot.

  • Transmit period (Tx 1st / Tx 2nd).

    Choose whether you transmit on the even ("1st") or odd ("2nd") T/R slots — like WSJT-X's "Tx even/1st". A top-bar toggle + a Settings mirror; persisted. (Two stations must pick opposite periods to complete a QSO — previously TX was hardcoded to even, which is why QSO timing "felt off".)

  • Click-to-tune waterfall.

    Click the waterfall to set your RX audio offset (green marker); shift-click sets TX (red marker), with a Hold Tx toggle to keep TX fixed. FT1 transmits at the chosen offset and hears the whole band; DX1 decodes at your tuned offset. The waterfall now marks real decoded signals at their audio frequencies.

  • Live clock-offset check (NTP).

    Tempo periodically queries an NTP server and shows your real PC-clock-vs-UTC offset in the top bar (e.g. "clock +0.3 s"), warning when it drifts past the slot tolerance. On by default; fails silently off-grid and can be disabled in Settings.

  • Operator manual + visual launch surface.

    A full operator manual in docs/manual/ (Getting Started, Operating Guide, Rig & Audio Setup, Frequency Plan, Tiers, Building, FAQ, Troubleshooting, Architecture, Roadmap), a screenshot-rich README with a hero banner and an animated demo GIF, a CODE_OF_CONDUCT.md, a SUPPORT.md, an on-air-report issue template, and enabled Discussions for on-air reports.

  • Tempo band plan + frequency controls.

    Dedicated, US-General-legal and CW-clear calling frequencies across HF and VHF/UHF (USB weak-signal + FM simplex), placed clear of the FT8/FT4/JS8/WSPR/PSK watering holes and the FM national calling / APRS / satellite / repeater segments — see docs/FREQUENCIES.md. New one-tap band selector and manual frequency entry in the top bar and Settings, retuning the rig live.

  • On-air operating controls

    (from a WSJT-X gap audit): RX input-level meter + Tx power + audio-device selection; Tune (key a carrier), Monitor (RX-only) and Stop TX; DT-derived time-sync health; and a Tx watchdog auto-stop.

  • Windows cross-build validated.

    All modem self-tests, tempo.exe, and the NSIS installer cross-build clean, and 5/5 Windows test exes pass (FT1 -15 dB, DX1 -18.6 dB, the 3-signal full-band scan, and FT1 acquisition + IR-HARQ rv through the C-ABI). Test exes now statically link the gfortran runtime, so they are self-contained.

  • Work a station + ADIF logbook.

    Click a heard station (or a decode) to start a directed QSO with them; a persistent ADIF logbook (log.adi) that auto-logs completed QSOs and powers worked-before (B4) highlighting, with a manual Log-QSO form; inbound WSJT-X Reply (GridTracker/JTAlert double-click-to-call) now drives Tempo.

  • Live decode feed + alerts + comforts.

    A color-coded WSJT-X-style decode list (CQ / directed-to-you / worked / new); audio + visual alerts on your call / CQ / new station; a UTC clock and great-circle bearing; and editable quick-reply macros.

Changed

  • Starts passive (hunt-and-pounce).

    Tempo no longer auto-calls CQ on startup; the presence beacon is an opt-in setting (default off), so the app listens and only transmits when the operator acts.

Fixed

  • CAT now connects when you Save.

    The radio loop read the rig/PTT config only once at startup, so choosing a rig in Settings did nothing until a full restart (and the VOX default never launched rigctld). It now applies rig/PTT/audio changes live — rebuilding the rig and launching rigctld the moment you save.

  • Test CAT.

    New WSJT-X-style Test CAT button (Settings → Rig Control): opens the rig, reads its frequency, and reports green (with the frequency) or a specific error. A live rig/CAT status and an audio-device error are now shown in the app instead of failing silently to a hidden console.

  • Waterfall shows live receive audio.

    The spectrum was computed from the decoder's once-per-slot frame (blank before the first decode, frozen during TX); it now reflects the continuously-captured sound-card input every cycle.

  • Tune

    keys through the connected CAT rig (previously a VOX no-op on the startup snapshot) and auto-releases after 12 s as a safety.

  • Installed app could fall back to the in-browser demo mock (fake stations / QSOs) if the Tauri backend wasn't detected; it now always uses the real engine.

Every version