hamradiotools

Nexus 0.14.0

Read-only launch, a 3-D logbook globe, on-time FT8 transmit. Released 21 July 2026. The current release is 1.24.0. Download it · Every version

(Backfilled: 0.14.0 shipped on all five artifacts but was never written up here.)

Changed — launching Nexus no longer touches your rig

  • Nexus now opens the radio read-only: it reads the actual frequency and mode and displays them, and commands nothing.

    Park on 40 m LSB for a net, open Nexus, and the rig stays put. The first command happens when you act. Underneath, every transmit path now asserts the correct mode immediately before keying, so a transmit can never silently key into the wrong mode.

  • FT8 transmits on the slot boundary

    , like WSJT-X. Previously Nexus finished decoding the prior slot before keying, costing ~1 s of your own over. Decoding now runs in parallel.

  • TX audio is a clean, flat signal.

    The transmit path gained a proper anti-aliased resampler; the FT8/FT4 envelope previously carried a periodic amplitude ripple.

Added

  • A 3-D globe of your contacts on the Logbook

    — every worked grid a band-coloured dot, with a per-band (VUCC-style) picker. It fully unloads when you leave the Logbook.

  • Tempo messages survive restarts

    , and a reply to a just-decoded station now transmits on the next cycle. Work keeps Tempo contacts in Tempo.

  • Logbook: Sync QRZ, Fetch LoTW, Import POTA, every column sortable, click a callsign for QRZ, and a per-row Spot.
  • Spots: a "My privileges" filter, and filters that survive leaving the view.

Fixed

  • Tuning step is remembered per cockpit; Classic ↔ Roster switching no longer clears decodes; Icom IC-7760 added; the…

    Tuning step is remembered per cockpit; Classic ↔ Roster switching no longer clears decodes; Icom IC-7760 added; the FT-710 setup no longer points at a dead Silicon Labs driver link.

Every version